home *** CD-ROM | disk | FTP | other *** search
/ BBS Toolkit / BBS Toolkit.iso / qbbs / qexe_264.zip / README.264 < prev    next >
Text File  |  1990-02-18  |  11KB  |  222 lines

  1. QuickBBS version 2.64 upgrade notes
  2. February 12, 1990
  3.  
  4.  
  5. This is the one all you multi-tasker types have been waiting for - an overlay
  6. version is now available!  File names for this release are QEXE_264.ZIP for
  7. the non overlay version and QOVL_264.ZIP for the overlay.
  8.  
  9. Many of you have noticed that the combined message base selections were not
  10. always properly saved in 2.61.  The fix for this problem is in two parts, one
  11. is internal to version 2.62 and later but the other requires a few moments of 
  12. your time:
  13.  
  14.  
  15. IMPORTANT  IMPORTANT  IMPORTANT  IMPORTANT  IMPORTANT  IMPORTANT  IMPORTANT
  16.   NOTICE     NOTICE     NOTICE     NOTICE     NOTICE     NOTICE     NOTICE
  17.  
  18.         Before installing 2.62, 2.63 or 2.64 FOR THE FIRST TIME, delete your
  19.         COMBINED.BBS file and run COMB-FIX which is included with this
  20.         release.  Failure to do so will leave some invalid data hanging
  21.         around which may cause undesirable results!  Upgrades from 2.62
  22.         or 2.63 DO NOT require this.
  23.  
  24. IMPORTANT  IMPORTANT  IMPORTANT  IMPORTANT  IMPORTANT  IMPORTANT  IMPORTANT
  25.   NOTICE     NOTICE     NOTICE     NOTICE     NOTICE     NOTICE     NOTICE
  26.  
  27.  
  28. Changes from 2.61 to 2.62:
  29.  
  30. When a user was in chat longer than the time he had left on-line, any sysop 
  31. key such as ALT-S would make him disappear, now he gets to stay around. 
  32. (ALT-H still works as well as ever <grin>)
  33.  
  34. When a user tries to enter an alias of "Sysop" and Quick says "you can't do
  35. that", now it means it!
  36.  
  37. The PAK file viewer now works correctly.
  38.  
  39. When a user who <used to> have privileges to read a message base, he no 
  40. longer can still access it via the combined board.
  41.  
  42. The system usage graph can now be aborted with an S
  43.  
  44. Some fixes have been to the internal ANSI driver thanks to Chris Lamprecht,
  45. it's still not perfect yet but it's getting better!  Let Chris know about any
  46. problems you find there.
  47.  
  48. A date of 00-00-?? no longer causes strange results in the list users command
  49.  
  50. You can now <F>orward echo mail even if the user name is not found in your
  51. user file.
  52.  
  53. Quick will now check for an upcoming event before letting the user on line.
  54.  
  55. The word MISSING in the file listing has been replaced by OFFLINE
  56.  
  57. When <X>porting a message, the message area and number now appear in the
  58. output.  Also, if the file you are <X>porting to already exists, you will be
  59. prompted whether you want to <A>ppend or <O>verwrite.
  60.  
  61. You are now prompted for confirmation before <D>eleting a message. 
  62.  
  63. A new option has been added to QCONFIG (page 4) so that you can decide whether
  64. or not to allow users to <D>elete messages addressed to them.  Messages can
  65. always be deleted by the author regardless of this setting. 
  66.  
  67. One of my favorites:  the user is now prompted for the reason he wants to
  68. chat before he is allowed to page.
  69.  
  70. A warning has been added 30 seconds before a user is logged off for
  71. inactivity at the keyboard.
  72.  
  73. When a file has been downloaded via the menu type 48, it is now indicated as
  74. such in the log by appending the letter A (for Auto) to the protocol.
  75.  
  76. The Combined selection menu has been enhanced, it now looks a lot like the
  77. one that used to be in an external program (hmmm, I can't even remember the
  78. name of the program now... ;->)  Because of the new Combined menu, the menu
  79. type 44 is no longer needed, and will no longer function.
  80.  
  81. Remote sysops can now <X>port messages - this capability is controlled by the
  82. new sysop security level on page 3 of QCONFIG.  Only users who have sysop
  83. access on a given message base AND have a security level equal to or greater
  84. than this value are allowed access to the <X>port command.  More capabilities
  85. may be tied to this value in future releases, so please excercise care in
  86. how you set it.
  87.  
  88. The colors used for the menu borders and colored entry fields are now
  89. configurable.  Please be sure to set up your preference on screen 3 of
  90. QCONFIG otherwise you'll wind up with black.  For those of you who like it
  91. the way it was in 2.61, use a value of 1.
  92.  
  93. A 2 second pause has been added after checking for new mail at logon
  94. so that the message doesn't fly past before it can be read.
  95.  
  96. The (WANT-CHAT) message in the status window no longer goes away after
  97. a type 15 exit.  Due to the nature of this bug, however, it will still
  98. appear on any programs which require the use of FIX_15.
  99.  
  100. It used to be that hitting backspace right after the dash while entering
  101. a phone number caused interesting results - it now works right.
  102.  
  103. Words greater than 72 characters no longer cause a line wrap problem in the
  104. internal message editor.
  105.  
  106. Deleting the first and only line in a message in the internal editor no
  107. longer puts you on line 0.
  108.  
  109. The time used field in USERS.BBS is now updated properly if the user drops
  110. carrier.  Don't know how this got by the first beta cycle, but in earlier
  111. versions a user could drop carrier for bonus time!
  112.  
  113. A bug in the critical error handling routine was found and corrected, now
  114. the proper address will be written to ERRORS.LOG to aid in debugging these
  115. things!
  116.  
  117. The origin line no longer contains a .0 - only actual points create a 
  118. full four dimensional address there.
  119.  
  120. A <B>ack command has been added to the message reader, it will take you back
  121. to the last message read.  This currently doesn't work right when reading
  122. mail addressed to you right after logon, please don't waste any net bandwidth
  123. reporting this bug!
  124.  
  125. The state of the full screen editor can now be displayed in an .A?? file by
  126. using ^F1 (control F followed by a 1).
  127.  
  128. The system log now shows the reason that a user went off-line.
  129.  
  130. An additional parameter can now be used with a type 15 exit.  If you put
  131. a menu name in the parameter field of a menu, that menu will be loaded
  132. as soon as the user re-enters QuickBBS.  If this option is omitted from
  133. a type 15, the first menu loaded will be TOP just as it always has been.
  134. This should put an end to a lot of flag waving <grin>  As a consequence of
  135. this change, some doors may not work quite right any more unless you use the
  136. FIX_15 program provided with this release.  The external programs affected
  137. by this are the ones that change user information on line, such as time banks
  138. and callback verifiers.  If you experience a fatal error when Quick reloads
  139. after a type 15, putting FIX_15 in your batch file after the external program
  140. exits will most likely be the cure.  This will become necessary on fewer
  141. doors as the third party authors release new versions of their software.
  142.  
  143. Menu type 46 has been added.  This will allow a user to read the header
  144. of a GIF file and find out the resolution and number of colors in the
  145. image.  The parameter field of the menu for this is the full path name
  146. of where your GIF files are stored - the user is prompted for the file
  147. name.
  148.  
  149. The tear line comment is now configurable for registered users only.  Set
  150. the DOS environment variable TEARLINE to activate this feature.  For 
  151. example SET TEARLINE=[REGISTERED] if you like it the way it was in 2.61.
  152.  
  153. Last but definitely not least, I introduced a rather unique little prompt
  154. in one of the beta versions based on a thread in the QuickBBS echo.  When
  155. I replaced it with a more professional looking prompt several of the beta
  156. testers lamented it's loss.  Well, I brought it back as an option, if you
  157. want it then set the environment variable GADS to anything, for example
  158. SET GADS=YES!  For those of you who have never logged onto a beta system
  159. and don't know what the devil I'm talking about, the prompt in question
  160. is the one that comes up when you want to delete a message and it asks
  161. if you're sure you want to delete it.
  162.  
  163. Changes from 2.62 to 2.63:
  164.  
  165. The scrambled local sysop screen is fixed.
  166.  
  167. An interim 'Foreign' Phone and town has been implemented.  Set the DOS 
  168. DOS environment variable PHONE to any non-blank value, and the phone
  169. format for new users will be 'free-style' to accomodate European, et al,
  170. phone formats.  It will allow up to 13 digits of numbers and hyphens, free
  171. form.  Future releases will allow a mask to be defined in the environment
  172. variable.  If the PHONE variable is set, in addition to the free format
  173. phone number, the 'City, State' prompt is changed to 'Town or province'.
  174.  
  175. It is no longer possible to login with a blank name if one word names are
  176. permitted.  Login with a ';' as a name is also trapped.
  177.  
  178. Graphics on a re-login by a user who is using a slower modem than the
  179. minimum for graphics will be suppressed.
  180.  
  181. Logoff text files should be transmitted completely before dropping carrier
  182. as the buffer is forced to be flushed. However, some modems with large buffers
  183. still drop carrier immediately with a drop of DTR.  QuickBBS has no way of
  184. knowing if the modems internal buffers are empty before dropping DTR.
  185.  
  186. Names with apostrophies, eg,  O'Brien, ect will capitalize the 'B'.  
  187. Names like McDonald will follow shortly.  They will still be lower case
  188. in the user records if entered by a version prior to 2.63, but they
  189. should work so no coversion should be required.  Some external editors
  190. still do not support free form case, but output from these editors
  191. should work within the QuickBBS environment until their authors have time
  192. to change them.  SIDE EFFECT:  If you are a sysop REGISTERED with the
  193. old format, if you edit your record in Qconfig, your key will need to be
  194. re-genned.  We will do this for you on request.
  195.  
  196. City and State capitalize properly...no need for external cleanup routines
  197. unless you want to standardize spellings, ect.
  198.  
  199. Changes for 2.64:
  200.  
  201.   2.64 has no new features, but is lacking a couple of the "features" 
  202.   formerly included in 2.62 and 2.63.  Most notably, repeated use of the
  203.   S key to abort a file listing will no longer cause undesired results.
  204.  
  205.   A blank line in PHONENUM.CTL no longer prohibits entry of all phone
  206.   numbers.
  207.  
  208.   It is no longer possible to force QuickBBS to accept a phone number
  209.   listed in PHONENUM.CTL by entering it enough times, former versions
  210.   would give up after a while and let you enter the bad number anyhow!
  211.  
  212.   The extra ) in the origin line when using an AKA address no longer appears.
  213.  
  214.   Many thanks to all of you who are using our product, and you have my
  215.   commitment to bring you the finest BBS software in the entire solar
  216.   system.
  217.  
  218.  
  219.                                         Enjoy!
  220.  
  221.                                         Steve & Richard
  222.